FLY COLOR SPRAY ACRYL BASE - WHITE ALUMINUM, High-quality acrylic lacquer in standard shades according to the RAL standard. Exact matching paintings and repairs to small damages in RAL colours. Specially for machines, engine parts, tools, all kinds of vehicles, steel furniture and much more.

DO IT YOURSELF!!

Quality and properties

    High-grade acrylic quality
    Quick-drying
    Very good coverage
    Very good colour-matching
    Excellent adhesion on many surfaces
    Good flow, smooth surface
    Suitable for indoors and outdoors applications
    Polishable surface
    Weather-resistant, light-proof, UV-resistant
    Scratch-, shock- and impact-resistant

Physical and chemical data

    Basis of the binder: Acrylate copolymeres
    Colour: diverse
    Smell: solvent
    Degree of gloss (at measurement angle 60° acc. to DIN 67530):
    glossy: 80 gloss units
    satin matt: 30-35 gloss units
    matt: 5-10 gloss units
    Efficiency:
    Depending on consistence and color of the ground:
    400 ml are sufficient for approx. 0.8-1.5 m² depending on colour
    Drying time (at 20°C, 50% relative air humidity):
    Dust-dry: after approx. 10 minutes
    Dry to touch: after approx. 30 minutes
    Coatable with clear laquer: after approx. 30 minutes
    Cured: after approx. 2 hours
    Can be polished after approx. 24 hours
    The drying time depends on surrounding temperature, air humidity and thickness of the applied coat.
    Temperature-resistant: up to 80°C
    Storage stability:
    10 years, if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
    Size: aerosol cans, maximum nominal volume 400 ml

Environment and labelling

Environmentally compatible: MOTIP DUPLI is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as "special refuse".


Before use, carefully read and observe the warning texts on the label!

Application

    Remove rust and dirt.
    The surface has to be clean, dry and free from fat.
    If necessary, apply a primer.
    Cover areas not to be painted.
    Before use, shake the can for 2-3 minutes.
    Test spray at an invisible spot to check colour-matching and compatibility of the lacquer.
    Apply from a distance of approx. 25 cm several thin coats.
    Do not paint on synthetic paints!

Tips for spray painting

Protect the object and the surrounding area from spray mist.
Temperature should range between +10°C and +25°C, max. air humidity 60 %.

Store in a dry place. Protect from direct sunlight and other sources of heat. Use only during dry weather, in places protected from the wind, and in well-ventilated rooms. Follow the warning texts on the labels